Birdman

FIG. 1 This is a side view of the doll with a plastic center piece. It is attached to the inside of the body 1a front and back with screws 1b or pin like clamp 1b. There is a open piece in the plastic 2 this is where a metal thin rod is use as a wings instead of a arm In 3a is open this is were the screw goes up and down. 3 is a thin piece of plastic that is attached to the bottom piece also attached the 3b inside of the body.

FIG. 2 with the screw in place 5 inside the plastic center piece a lever 5a outside the back this lever moves the screw up and down. There is a thin slit in the back of the center piece 5b that will leave room for lever to move. When lever is down, wings are in a upward position, when lever is up the wings are in a downward position shown in figures to follow.

FIG. 3 this is a back view of the doll with the plastic cross like center piece 5a like in FIG. 1 AND 2 the plastic is screw in the bottom area of the chest 6a and 6b back and front. 7a show the slit in the back of the center piece this is were lever works up and down

FIG. 4 screw with lever 8a fits inside cross like plastic 8b in

FIG. 5 8c show the screw and lever attached together

FIG. 5a front view of metal rods 8a with groves at the end of rods 8c connects to center screw 8b

FIG. 5b screw in center is up 9a the metal rods 9b are down

FIG. 6 as shown in drawing the cross like plastic with two thin metal rods 9b and is attached to the metal pins 9c this give movement to the wings. 9d. Inside the body.

FIG. 7 action figure with movable wings, cross center piece with curve metal rods 10a in upright position 10b the metal rods stick outside body though shoulder area 10e. Rods are cover by fabric or feather like material 10c and is attached to the side of body 11a lever is downward position in back 10d the wings are in a upright position.

FIG. 8 back view of the doll with the lever down 12a the wings 12b are upright.